Socket Types
Find out the type of socket and plug used in each country. Avoid compatibility problems on your trips.
SizesGrid
Conversão de Tamanhos
Categoria
Socket Types
Comprovante de Conversão
De
Country
Para
---
Socket Type
Os resultados são baseados em tabelas de equivalência padrão e podem variar.
sizesgrid.com
Sua ferramenta completa para qualquer conversão: de sapatos a calorias, de metros a watts. Simples, rápido e preciso.
Understand the concept
“Socket type” is the physical standardization of the fitting (plug and socket shape). Different countries use different standards (Type A, B, C, E, F, G, I, N etc.).
This is different from voltage. You can have the right outlet and still need a transformer if the device's voltage is not compatible.
Practical example: if you travel to a country that uses Type G (common standard in the United Kingdom) and your charger has a Type N plug (Brazil), you need a physical Type N → Type G adapter. If the charger accepts 100–240V, it normally does not need a transformer.
As many countries accept more than one type, this tool helps you identify the most frequent patterns to plan which adapter to take.
Tip: in addition to the type, check that your adapter is grounded when necessary and that it supports the current of your equipment (especially for high-power devices).
How to use this tool
- Select the destination country.
- See the most common socket/plug types.
- Choose an adapter compatible with the indicated type.
- Also check the country's voltage and the range of your device.
FAQ
Are plug type and voltage the same thing?
No. Socket is the physical format; Voltage is electrical tension.
Do I always need an adapter?
No. If your country uses the same type as your plug, you may not need it.
Can a country have more than one type?
Yes. Some countries use multiple standards.
Does the adapter solve voltage problems?
No. Adapter only changes the fit; for voltage, transformer may be required.
What to look for on the charger?
Look for “Input: 100–240V” to indicate automatic bivolt.
Technical notes
Base técnica
Formula: result = equivalence(origin, value, target). Unit & scope: in Socket Types, we use an equivalence mapping across standards. The input is interpreted in the origin standard and we return the equivalent in the target standard (country, plug_type).
Observação
Discrete equivalences vary by standard, industry and manufacturer; when possible, use a physical measurement (e.g., cm) as the baseline.
Referência
Domain standards when applicable (e.g., IEC for electrical, ISO for sizing) and widely used industry practices.